Fisher CZ-7a Metal Locator from GISCO

MODEL CZ-7a TARGET ID
METAL LOCATOR

Hipmountable, deep-seeking target ID detector in a rugged, rainproof package.

Fishers CZ-7a Pro offers LCD target ID with three distinct target tones and a soft bell tone for large shallow objects.

With the easy to program notch, you can reject or accept any combination of seven target catego-ries. The CZ-7a Pro offers surface mount electronics with zero battery drain for last setting turn-on and faster pinpoint-mode response, a hot wide scan, all metal, auto tune mode, a wet sand mode and touch VCO pinpointing. The control box of the Pro is belt, hip, or even chest mountable with the optional harness.

•Lock-On LCD Target I.D.
•3-Tone Audio Target I.D.
•Bright LCD Back Light
•Programmable Notch
•Big-Target Bell Tone
•Rain proof/Splashproof
•Touch-Pad Controls
•3-Piece Handle
•Built-in Mylar Speaker
•Dual VLF Frequency

•Wet-Sand Beach Mode
•Wide-Scan Autotune Mode
•Digital Depth Reading
•Last Settings Memory
•Converts to Hip Mount
•Faint-Target Audio Boost
•Surface Mount Electronics
•Turn-On-and-Go Operation
•Optional Manual Ground Adjust
•Only two 9V Drop-In Batteries

•Microproccessor Controlled
•Double-Locking Nylon Stem
•Silent, VLF Slow-Motion Search
•No-Motion VCO Pinpointing
•Constant Battery Monitor
•Pistol-Grip, S-Handle Design
•Foam Grip and Armrest
•8” or 10” Spider Coil
•Optional, Hot Little 5” Coil
•Optional Compact Hard Case

CONTROLS
POWER ON/OFF-GROUND BALANCE Single-turn potentiometer with switch. Ground Balance function works in conjuction with Pinpoint/Search touch pad. “5” is turn-on-and-go “PRESET” position.
NORM/SALT Touch-pad mode switch for normal soil or wet sand operation.
AUTO/I.D. Touch-pad mode switch for all metal autotune target I.D.
SENS Touch pad controls sensitivity in conjuction with arrow touch pads.
VOL Touch pad controls for speaker and headset volume.
LIGHT PRESET Touch pad turns on LCD back light.
NOTCH Touch pad used in conjuction with arrow touch pads to reject or accept specific targets.
PINPOINT/SEARCH Touch pad controls to exit VOL, SENS or NOTCH functions and enter search mode. Press and hold for no-motion pinpointing and depth reading.
ARROW TOUCH PADS to adjust VOL, SENS and NOTCH levels.