MINIMATE PLUS

 VIBRATION AND OVERPRESSURE

 MONITOR

Versatile

Use the Minimate Plus monitor with an Instantel Standard Triaxial Geophone (ISEE or DIN version) and an overpressure microphone (Linear or A Weight) to provide a rugged, reliable compliance monitor­ing system. Add the Instantel 8-Channel option and a single monitor may be used with two triaxial geophones and two micro­phones.

Channels

Vibration Monitoring (with Standard Triaxial Geophone)

  Range

  Resolution

  Accuracy (ISEE / DIN)

  Transducer Density

  Frequency Range (ISEE /     DIN)

  Maximum Cable Length (ISEE / DIN)

Air Overpressure Monitoring

  Weighting Scales

  Linear Range

  Linear Resolution

  Linear Accuracy

  Linear Frequency Response

  A-weight Range

  A-weight Resolution

WAVEFORM RECORDING

Record Modes

Seismic Trigger

Acoustic Triggers

  Linear

  A-weight

Sample Rate

Record Stop Mode

Record Time

AutoRecord Time

Cycle Time

Storage Capacity

  Full Waveform Events

  Event Summaries

HISTOGRAM RECORDING

Record Modes

Recording Interval

Storage Capacity

PHYSICAL SPECIFICATIONS

Dimensions

Weight

Battery

User Interface

Display

PC Interface

Auxiliary Inputs and Outputs

Environmental

  LCD Operating Temperature

  Electronics Operating         Temperature

Remote Communications

Additional Features

Microphone and Triaxial Geophone or 4 independent user-configurable channels (two Microphones and two Triaxial Geophones or 8 independent channels with optional 8-channel

upgrade)

Up to 254 mm/s (10 in/s)

0.127 mm/s (0.005 in/s) or 0.0159 mm/s (0.000625 in/s) with built-in preamp

+/- 5% or 0.5 mm/s (0.02 in/s), whichever is larger, between 4 and 125 Hz / DIN 45669-1 standard

2.13 g/cc (133 lbs/ft3)

2 to 250 Hz, within zero to -3 dB of an ideal flat response / 1 to 315 Hz

75 m (250 ft) / 1,000 m (3,280 ft)

Linear or A-weight

88 to 148 dB (500 Pa (0.072 PSI) Peak)

0.25 Pa (0.0000363 PSI)

+/- 10% or +/- 1 dB, whichever is larger, between 4 and 125 Hz

2 to 250 Hz between -3 dB roll off points

50 to 110 dBA

0.1 dBA

Manual, Single-shot, Continuous

0.125 to 254 mm/s (0.005 to 10 in/s)

100 to 148 dB

55 to 110 dBA

1,024 to 16,000 S/s per channel (independent of record time), up to 65,000 S/s in single-channel

mode with advanced software (max 8,000 S/s per channel for 8 channels)

Fixed record time, Instantel® AutoRecord™ record stop mode

1 to 100 seconds (programmable in one-second steps) or 500 seconds plus 0.25 seconds pre-trigger

Auto window programmable from 1 to 9 seconds, plus a 0.25 second pre-trigger. Event is recorded untilactivity remains below trigger level for duration of auto window, or until available memory is filled.

Recording uninterrupted by event processing - no dead time

300 one-second events at 1,024 S/s sample rate (1,500 event capacity with optional memory upgrade)

1,750 (8,750 event capacity with optional memory upgrade)

Histogram and Instantel Histogram Combo™ (monitor captures triggered waveforms while

recording in Histogram mode)

2, 5 or 15 seconds; 1, 5 or 15 minutes

46,656 intervals - 3 days at 5-second intervals or 102 days at 15-minute intervals

(with memory upgrade - 15 days at 5-second intervals or 540 days at 15-minute intervals)

81 x 91 x 160 mm (3.2 x 3.6 x 6.3 in)

1.4 kg (3 lbs)

Rechargeable 6 V sealed gel cell - capacity for 210 hours of continuous monitoring

8-key keypad with domed tactile keys

4-line x 20-character, high-contrast, backlit LCD with on-line help

RS-232

External Trigger, Remote Alarm, coordinate download from GPS

-10 to 500C (14 to 1220F)

-20 to 600C (-4 to 1400F)

Compatible with Telephone, GSM, Cellular, RF, Satellite, Short-haul modems and Ethernet® device servers.Automatically transfers events when they occur through the Instantel Auto Call Home™ feature.

Monitor start/stop timer